HOME  >>  News

What Parts Of The Aluminum Alloy Truss Are Made Up Of?

[2019-03-14]

A complete set of Aluminum Alloy Truss System: mainly composed of aluminum trusses of different lengths and different specifications, base, counter head, diagonal support, square sleeve, cross arm, hoist, sling, and construction.

1. Base: It can be divided into iron and aluminum base. Mainly used for the stabilization of the ground.

2. Square sleeve: The height of the beam can be easily adjusted by the square sleeve.

3. Inclined support: used to support the stability of the entire system of aluminum alloy trusses.

4. Cross-arm: At the top of the truss, it is mainly for hanging hoists.

5. Counter-head: It is used when building a high height, and can achieve a higher height by erecting the head.

6. Sling: A tie that connects the hoist to the aluminum truss.

7. Hoist: It can be divided into two types: hand-held and electric hoist, which are used to lift aluminum alloy trusses.

The above is an introduction about which parts of the aluminum alloy truss are made. I hope that it will help you after reading. If you have other Stage Truss problems, you can contact us if you want to consult.

Aluminum Alloy Truss System

CONTACT US

  • Tel/WhatsAPP: +86 159 8664 2014
  • E-mail: info@skymear.com
  • Add: ROOM 1005,10/F,HO KING COMMERCIAL
    CENTER, 2-16 FA YUEN STREET,MONGKOK,KL HK

FOLLOW US

  • Copyrights © Skymear Industrial Limited
  • All Rights Reserved
  • Find Us
Skymear Truss and staging

HOME  >>  News

What Parts Of The Aluminum Alloy Truss Are Made Up Of?

[2019-03-14]

A complete set of Aluminum Alloy Truss System: mainly composed of aluminum trusses of different lengths and different specifications, base, counter head, diagonal support, square sleeve, cross arm, hoist, sling, and construction.

1. Base: It can be divided into iron and aluminum base. Mainly used for the stabilization of the ground.

2. Square sleeve: The height of the beam can be easily adjusted by the square sleeve.

3. Inclined support: used to support the stability of the entire system of aluminum alloy trusses.

4. Cross-arm: At the top of the truss, it is mainly for hanging hoists.

5. Counter-head: It is used when building a high height, and can achieve a higher height by erecting the head.

6. Sling: A tie that connects the hoist to the aluminum truss.

7. Hoist: It can be divided into two types: hand-held and electric hoist, which are used to lift aluminum alloy trusses.

The above is an introduction about which parts of the aluminum alloy truss are made. I hope that it will help you after reading. If you have other Stage Truss problems, you can contact us if you want to consult.

Aluminum Alloy Truss System

Previous: Aluminum LightingTrusses Make Stage Construction Easier

Next: How To Choose An Aluminum Alloy Stage?

HOT PRODUCTS

CONTACT US

  • Tel/WhatsAPP: +86 159 8664 2014
  • E-mail: info@skymear.com
  • Add: ROOM 1005,10/F,HO KING COMMERCIAL
    CENTER, 2-16 FA YUEN STREET,MONGKOK,KL HK

FOLLOW US

  • Copyrights ©Skymear Industrial Limited
  • All Rights Reserved
  • Find Us

HOME  >>  News

What Parts Of The Aluminum Alloy Truss Are Made Up Of?

[2019-03-14]

A complete set of Aluminum Alloy Truss System: mainly composed of aluminum trusses of different lengths and different specifications, base, counter head, diagonal support, square sleeve, cross arm, hoist, sling, and construction.

1. Base: It can be divided into iron and aluminum base. Mainly used for the stabilization of the ground.

2. Square sleeve: The height of the beam can be easily adjusted by the square sleeve.

3. Inclined support: used to support the stability of the entire system of aluminum alloy trusses.

4. Cross-arm: At the top of the truss, it is mainly for hanging hoists.

5. Counter-head: It is used when building a high height, and can achieve a higher height by erecting the head.

6. Sling: A tie that connects the hoist to the aluminum truss.

7. Hoist: It can be divided into two types: hand-held and electric hoist, which are used to lift aluminum alloy trusses.

The above is an introduction about which parts of the aluminum alloy truss are made. I hope that it will help you after reading. If you have other Stage Truss problems, you can contact us if you want to consult.

Aluminum Alloy Truss System

Previous: Aluminum LightingTrusses Make Stage Construction Easier

Next: How To Choose An Aluminum Alloy Stage?

HOT PRODUCTS

CONTACT US

  • Tel/WhatsAPP: +86 159 8664 2014
  • E-mail: info@skymear.com
  • Add: ROOM 1005,10/F,HO KING COMMERCIAL
    CENTER, 2-16 FA YUEN STREET,MONGKOK,KL HK

Copyrights ©Skymear Industrial Limited
All Rights Reserved