stage truss

5 Common Problems In Building Aluminum Stages

[2018-12-28]

As a core component of the movement, the Aluminum Stage has to consider many topics in the construction of the aluminum stage, such as lighting, the stability of the aluminum alloy stage, the load-bearing capacity of the material, etc. The following is the most introduced in the aluminum alloy stage construction. Five common problems are common.

1. The problem of lighting is particularly very tense. If the movement is outdoors, it is necessary to understand the time of the movement in advance, and consider the angle of the sunlight to avoid the backlighting of the aluminum alloy stage, which may cause interference to the work of the photographic camera. If the movement is indoors, then it is necessary to consider the position of the lamp, one must be convenient to receive electricity, and the other is to prevent the wire from passing through the audience passage, forming a safety hazard.

2. Aluminum alloy stage height, in the construction process, it is necessary to adjust the height of the aluminum alloy stage to the length and width of the auditorium, so that the results of the aluminum alloy stage will be perfect.

3. In some large-scale sports, if the aluminum alloy stage is too single, it will look dull and boring, but the reasonable design makes the aluminum alloy stage feel organized, and the result is completely opposite.

4. For the actors on the aluminum alloy stage, the upper and lower channels must also be considered reasonably. It is convenient for admission and easy to play. It is best not to set the channel to the stair type, and the slope type will be better.

5. Finally, it is a safety issue. Before the aluminum alloy stage is built, it is necessary to fully understand the static load and dynamic load of the aluminum alloy stage in motion, so as to ensure that the aluminum alloy stage will not collapse.

These are just a few of the most common meticulous things in the construction of aluminum alloy stages. In addition, there are many details that must be controlled, perfect sports, and necessary professional practice.

We also have Stage Lighting Truss Systems available for you to contact us for more information on the stage construction.

Flex Stage Accessories

CONTACT US

  • Tel/WhatsAPP: +86 159 8664 2014
  • E-mail: info@skymear.com
  • Add: ROOM 1005,10/F,HO KING COMMERCIAL
    CENTER, 2-16 FA YUEN STREET,MONGKOK,KL HK

FOLLOW US

  • Copyrights ¬© Skymear Stage Truss
  • All Rights Reserved
  • Find Us
Skymear Stage Truss

5 Common Problems In Building Aluminum Stages

[2018-12-28]

As a core component of the movement, the Aluminum Stage has to consider many topics in the construction of the aluminum stage, such as lighting, the stability of the aluminum alloy stage, the load-bearing capacity of the material, etc. The following is the most introduced in the aluminum alloy stage construction. Five common problems are common.

1. The problem of lighting is particularly very tense. If the movement is outdoors, it is necessary to understand the time of the movement in advance, and consider the angle of the sunlight to avoid the backlighting of the aluminum alloy stage, which may cause interference to the work of the photographic camera. If the movement is indoors, then it is necessary to consider the position of the lamp, one must be convenient to receive electricity, and the other is to prevent the wire from passing through the audience passage, forming a safety hazard.

2. Aluminum alloy stage height, in the construction process, it is necessary to adjust the height of the aluminum alloy stage to the length and width of the auditorium, so that the results of the aluminum alloy stage will be perfect.

3. In some large-scale sports, if the aluminum alloy stage is too single, it will look dull and boring, but the reasonable design makes the aluminum alloy stage feel organized, and the result is completely opposite.

4. For the actors on the aluminum alloy stage, the upper and lower channels must also be considered reasonably. It is convenient for admission and easy to play. It is best not to set the channel to the stair type, and the slope type will be better.

5. Finally, it is a safety issue. Before the aluminum alloy stage is built, it is necessary to fully understand the static load and dynamic load of the aluminum alloy stage in motion, so as to ensure that the aluminum alloy stage will not collapse.

These are just a few of the most common meticulous things in the construction of aluminum alloy stages. In addition, there are many details that must be controlled, perfect sports, and necessary professional practice.

We also have Stage Lighting Truss Systems available for you to contact us for more information on the stage construction.

Flex Stage Accessories

Previous: Three Methods For Obtaining Competitive Advantage Of Aluminum Alloy Truss

Next: Skymear wish you all a Merry Christmas

HOT PRODUCTS

CONTACT US

  • Tel/WhatsAPP: +86 159 8664 2014
  • E-mail: info@skymear.com
  • Add: ROOM 1005,10/F,HO KING COMMERCIAL
    CENTER, 2-16 FA YUEN STREET,MONGKOK,KL HK

FOLLOW US

  • Copyrights ¬©Skymear Stage Truss
  • All Rights Reserved
  • Find Us

5 Common Problems In Building Aluminum Stages

[2018-12-28]

As a core component of the movement, the Aluminum Stage has to consider many topics in the construction of the aluminum stage, such as lighting, the stability of the aluminum alloy stage, the load-bearing capacity of the material, etc. The following is the most introduced in the aluminum alloy stage construction. Five common problems are common.

1. The problem of lighting is particularly very tense. If the movement is outdoors, it is necessary to understand the time of the movement in advance, and consider the angle of the sunlight to avoid the backlighting of the aluminum alloy stage, which may cause interference to the work of the photographic camera. If the movement is indoors, then it is necessary to consider the position of the lamp, one must be convenient to receive electricity, and the other is to prevent the wire from passing through the audience passage, forming a safety hazard.

2. Aluminum alloy stage height, in the construction process, it is necessary to adjust the height of the aluminum alloy stage to the length and width of the auditorium, so that the results of the aluminum alloy stage will be perfect.

3. In some large-scale sports, if the aluminum alloy stage is too single, it will look dull and boring, but the reasonable design makes the aluminum alloy stage feel organized, and the result is completely opposite.

4. For the actors on the aluminum alloy stage, the upper and lower channels must also be considered reasonably. It is convenient for admission and easy to play. It is best not to set the channel to the stair type, and the slope type will be better.

5. Finally, it is a safety issue. Before the aluminum alloy stage is built, it is necessary to fully understand the static load and dynamic load of the aluminum alloy stage in motion, so as to ensure that the aluminum alloy stage will not collapse.

These are just a few of the most common meticulous things in the construction of aluminum alloy stages. In addition, there are many details that must be controlled, perfect sports, and necessary professional practice.

We also have Stage Lighting Truss Systems available for you to contact us for more information on the stage construction.

Flex Stage Accessories

Previous: Three Methods For Obtaining Competitive Advantage Of Aluminum Alloy Truss

Next: Skymear wish you all a Merry Christmas

HOT PRODUCTS

CONTACT US

Copyrights ©Skymear Stage Truss
All Rights Reserved